la qualité des plus grandes marques

le service d'un partenaire de proximité

Chargeuse Pelleteuse JCB 2CX - 75CV - 0.6m3 - 3.70m

Chargeuse pelleteuse JCB 2CX d'une puissance de 75 CV d'une capacité de benne de 0.6m3 et d'une profondeur de fouille pouvant atteindre les 3.70 mètres .

Demander un devis
prev
next
close
Chargeuse Pelleteuse JCB 2CX - 75CV - 0.6m3 - 3.70m
  • Description
  • Caractéristiques techniques
  • Documentation
  • Localiser la machine
  • équipement

 
Productivité élevée :
Un moteur puissant JCB de 75 ch qui développe un couple élevé pour s'adapter à toutes les applications.
Des contrôles journaliers à hauteur d'homme permettent des réparations plus rapides et plus efficaces.
Les ponts à différentiel à glissement limité à l'avant à l'arrière fournissent une excellente traction, même dans les conditions les plus difficiles.


Confort du conducteur :
Le faible niveau sonore à l'intérieur de la cabine réduit la fatigue du conducteur.
L'attention réservée à l'ergonomie du poste de conduite garantit un confort maximal du conducteur pendant une longue journée de travail.
L'espace exceptionnel et la visibilité panoramique améliorent la productivité et la sécurité dans l'environnement de travail.
Le siège à sept positions offre au conducteur le meilleur confort possible et fait de la conduite une expérience agréable.


Fiable et durable :
L'endurance de tous les organes principaux est testée pour assurer leur intégrité structurelle.
Les tuyauteries et les attaches sont zinguées, tandis que la cabine est immergée par électrophorèse pour éviter la rouille.


Facilité d'entretien :
Les panneaux latéraux amovibles permettent un accès rapide et facile pour les contrôles journaliers et l'entretien régulier.
La courroie de ventilateur à réglage automatique à 6000 heures permet d'éviter les temps d'immobilisation pour entretien

STATIC DIMENSIONS (mètres) :
JCB Backhoe Loaders feature heavy-duty one piece mainframe, componentised driveline and fully enclosed engine compartment. All fluid and component compartments are lockable using the ignition key.
Machine model 2CX
A Total travel length 5.13
B Axle centreline distance 1.99
C Slew centre to rear axle centre distance 1.13
D Stabiliser feet clearance 0.31
E Kingpost clearance 0.49
F Steering wheel centre height 1.76
G Cab roof height 2.65
H Total travel clearance 2.72
J Rear frame width 1.85
K Shovel width 1.85
Machine model 2CX Streetmaster
A Total travel length 5.40
B Axle centreline distance 1.99
C Slew centre to rear axle centre distance 1.13
D Stabiliser feet clearance 0.31
E Kingpost clearance 0.49
F Steering wheel centre height 1.76
G Cab roof height 2.65
H Total travel clearance 2.72
J Rear frame width 1.85
K Shovel width 1.85
Machine model  2CXS
A Total travel length 5.13
B Axle centreline distance 1.99
C Slew centre to rear axle centre distance 1.13
D Stabiliser feet clearance 0.31
E Kingpost clearance 0.49
F Steering wheel centre height 1.76
G Cab roof height  2.65
H Total travel clearance 3.05
J Rear frame width 1.98
K Shovel width 2.00
Machine model 2CX Airmaster
A Total travel length 5.17
B Axle centreline distance 1.99
C Steering wheel centre height 1.76
D Cab roof height 2.65
E Total travel clearance 2.72
F Shovel width (blacktop GP shovel) 1.37
G Width over tyres 1.83


GROUND LINE ANGLES :
A Approach angle 45°
B Interference angle/ramp to ground plane 130°
C1 Departure angle 27°
C2 Departure angle 27°


OPERATING WEIGHTS :
2CX 5900 Kg
2CX Streetmaster 6300 Kg
2CXS 6150 Kg
2CX Airmaster 5890 Kg


ENGINE
Direct injection diesel. Belt driven water pump, cold start aid – territory dependent.
2CX / 2CX Streetmaster / 2CXS
Engine emissions Stage III
Manufacturer JCB
Aspiration Turbo charged
Displacement litre 4.4
No. of cylinders 4
Bore mm 103
Stroke mm 132
Rated engine rpm 2200
Power ratings
Rated ISO 14396 (SAE J1995 Gross) kW (HP) 55 (75)
Maximum torque
Rated ISO 14396 (SAE J1995 Gross) Nm 329
Max. torque rpm 1200


 


2CX Airmaster


Engine emissions Stage III
Manufacturer JCB
Aspiration Turbo charged
Displacement litre 4.4
No. of cylinders 4
Bore mm 103
Stroke mm 132
Rated engine rpm 1900
Power ratings
Rated ISO 14396 (SAE J1995 Gross) kW (HP) 53.8 (73)
Maximum torque
Rated ISO 14396 (SAE J1995 Gross) Nm (lbf ft) 329 (243)
Max. torque rpm 1200


STEERING :
Full power hydrostatic system utilising the main hydraulic pump with integral steering priority valve. In the event of engine failure, emergency steering is maintained.
Machine model 2CX / 2CX Streetmaster / 2CX Airmaster
Steering axles Front and rear
Steering turns – lock to lock 4
Kerb – kerb turning circle – unbraked – 4WS 6.85m
Kerb – kerb loader clearance circle – unbraked – 4WS (2000mm GP) 8.71m
Machine model 2CXS
Steering axles : Front and rear
Steering turns – lock to lock 4
Kerb – kerb turning circle – unbraked – 4WS 7.20m
Kerb – kerb loader clearance circle – unbraked – 4WS (2000mm GP) 9.35m


ENGINE SUPPORT SYSTEM :
Engine support system is designed for ease of daily checks, routine maintenance and longer service intervals.
Fuel type Diesel.
Fuel filter Replaceable spin-on cartridge plus water/sediment separator.
Air cleaner Dual, dry element cyclonic type.
Oil filter and lubrication Full flow, spin-on type filter.
Cooling system Hot climate specification, pressurised 14.5 psi (1.0 bar) suction fan. Pressurised recovery tank.


ELECTRICAL AND INSTRUMENTATION :
12 volt negative ground, utilising wiring and connectors meeting IP69 water ingress test standard. Central fuse panel supplemented with main circuit breakers at battery positive terminal.
Gauges Tachometer, engine coolant temp, fuel level, hourmeter clock.
Warning system Audible and visual system for engine oil, transmission, park brake, battery, air cleaner, alternator.
Battery 900 CCA/110 A/hr.
Pre-wire Radio speakers (cab), beacon (all).
Horn Controlled from both front and rear.
Alternator 95 amp.
Front working lights 2 twin beam fixed position.
Rear working lights 2 adjustable.


TRANSMISSION :
The JCB Transmissions are designed and built specifically for JCB Backhoe Loaders. They feature synchronised shifting in all gears.
Powershuttle between forward and reverse. Ground speeds are designed to maximise production.
Machine model 2CX / 2CXS / 2CX Streetmaster
Manufacturer JCB
Type Syncroshuttle
Torque converter 280mm (11")
Torque converter ratio 2.67:1
Gears forward/reverse 4
Gear selection Manual
Shuttle control – F/R Power shuttle
Travel speeds (Tyres – front 12.5x18)
Gear 1 3.6 Km/h
Gear 2 9.9 Km/h
Gear 3 20.5 Km/h
Gear 4 33.1 Km/h
Machine model 2CX Airmaster
Manufacturer JCB
Type Syncroshuttle
Torque converter 280mm (11")
Torque converter ratio 2.67:1
Gears forward/reverse 4
Gear selection Manual
Shuttle control – F/R Power shuttle
Travel speeds (Tyres – front 12.5x18)
Gear 1 3.3 Km/h
Gear 2 8.9 Km/h
Gear 3 18.1 Km/h
Gear 4 28.8 Km/h


FRONT AXLE :
JCB front axles are designed and built specifically for backhoe loaders and accept a wide variety of tyre combinations.
Machine model All models
Type JCB Max-trac steer drive torque proportioning
Axle ratings kg
Static load rating 7484
Dynamic load rating 3765
Oscillation angle 9.5°
Steering ram Double acting


REAR AXLE :
JCB rear axles are designed and built specifically for backhoe loaders and accept a wide variety of tyre combinations.
Machine model All models
Type JCB Max-trac torque proportioning with outboard planetary drive
Limited slip
Axle ratings kg
Static load rating 7484
Dynamic load rating 3765


CAB :
Excellent visibility (and safety) is provided by the extra large tinted glass areas. Cab frame is ROPS and FOPS approved for maximum operator protection. ISO standard 3471 and 3449 (SAE J1040 and J231).
• A fully adjustable seat with lumbar support combines with ergonomically positioned controls to minimise operator fatigue.
• The in-cab noise levels are the lowest in the business for maximum operator comfort.
• A radio location is provided as standard plus twin speakers for stereo sound.
• Cab provides easy access through a left hand single door. Standard features include: lap seat belt, 3 speed fresh air/recycle heater, front and rear screen wash/wipers (cab), front and rear horn, exterior mirrors, and flat easy-clean floor.
• The instrument panel is positioned to the right-hand side for ease of viewing from either the loading or excavating position and has an optional lockable cover for vandal proofing. Engine speed, fuel and coolant temperature gauges, (and clock on cab builds) are mounted in the panel.
• Fixed steer column.
• Large opening rear window (cab).
• Static or mechanical suspension seat gives the operator a comfortable operating position.
• 12V power supply.


BRAKES :
The JCB braking system ensures effective, fade-free braking. The self-adjusting, multi-disc arrangement is inboard mounted and is oil immersed for minimum maintenance and a long operating life.
• Twin brake pedals provide tighter turning circle and enhanced steering control on slippery ground.
• Automatic compensation ensures ‘straight’ machine braking.
• Disc diameter: 165 mm (Friction area: 130502 sq.mm (202 sq. in) per brake.
• The independent parking brake is mounted on the input shaft rear axle and will hold the machine on 1:3 gradients.
It is an over-centre type, adjustable within the cab, with transmission disconnect to prevent premature brake pad wear.
Park brake disc diameter: 285 mm . Friction area: 74984 sq.mm (116 sq. in).


TYRES :
340/65 x R18 Goodyear
340/80 x R18 Michelin XMCL
12.5 x 18 x 10 Goodyear
340/80 R18 Goodyear IT530


HYDRAULIC SYSTEM :
The Open Centre system uses gear pumps with a power modulation valve that automatically varies hydraulic power to match digging conditions for extra performance and power.
• Open centre hydraulic system using simple and reliable high efficiency gear pump.
• Single pump system with priority valve to ensure metered supply to steering and main hydraulic system.
• Easily used, ergonomically positioned levers give excellent control of the loader and backhoe, thus reducing operator fatigue.
• A full flow 10 micron filter ensures that oil stays free of contaminants.
Pump flows at 2200rpm* l/min
Main pump output 81.0
System working pressure bar
Backhoe and loader 230
*Optimum flow
**1900rpm


SERVICE CAPACITIES (Litres):
Cooling system 14
Fuel tank 83
Engine oil with filter 11
Transmission with filter 17
Rear axle 9.0
Front drive axle 9.0
Hydraulic system incl. tank 83


COMPRESSOR (Airmaster model only) :
The screw type compressor is purpose-designed for resurfacing work. It offers true 140 cubic feet per minute (66 litres per second) capacity. A heavy duty cage protect against impact damage while an automatic speed setting on the compressor ensures maximum economy by providing power on demand.
An external stop/start facility means that the operator doesn’t have to be in the cab to engage the compressor drive.
It also allows fast shutdown in an emergency.
With the oil/air receiver only requiring an inspection every 6 years, maintenance time will be cut to a minimum.
The compressor will only operate when the parking brake is applied. And to minimise the risk of mechanical damage, overheat sensors will disengage the compressor drive if the oil temperature rises above normal.
Type Compair Holman screw type
Air output 140CFM, 66 litres/sec
Pressure at outlet taps 7 bar (100psi)
Engine speed control Fully modulating engine speed control linked to air demand
Compressor drive Direct
Compressor cooling Air blast type
Air outlets 2¾ locks
Compressor oil capacity 17 litres
Ground clearance under compressor assembly 273mm
Weight of compressor plus balance weight 900kg
Tool stowage Two heavy duty breakers
Power take off Independent, hydraulically operated


LOADER DIMENSIONS (mètres) :
Narrow bucket
Overall width with bucket 1.37
M Dump height 2.42
N Load over height 2.99
O Loader hinge pin height 3.24
P Pin forward reach 0.33
Q Reach at ground (toe plate horizontal) 1.43
R Max. reach at full height 1.13
S Reach at full height fully dumped 0.71
T Dig depth 0.10
U Roll back at ground degrees 45
V Dump angle degrees 45°
 

Documentation commerciale et technique 2CX (UK)

Pas de localisation